C110 428-36T-14T

Maintenance and upkeep

Installation adjustment: The sprocket should be installed on the shaft without tilting or swinging. The end faces of two sprockets in the same transmission component should be in the same plane. When the center distance of the sprockets is less than 0.5 meters, a deviation of 1 millimeter is allowed; When the center distance of the sprocket is above 0.5 meters, a deviation of 2 millimeters is allowed

Check for wear: Regularly check the wear of the sprocket. If the sprocket tooth surface is worn to a certain extent, it should be flipped over and used in a timely manner (referring to sprockets with adjustable surfaces) to extend the service life.

. If the sprocket is severely worn, both a new sprocket and a new chain should be replaced to protect good meshing

Lubrication: During use, lubricating oil should be added to the chain and sprocket in a timely manner to allow the lubricating oil to enter the clearance between the rollers and the inner sleeve. The actual effect is mainly based on working conditions, reducing wear

Modification

Some motorcycle enthusiasts will modify the sprocket according to their own needs.

. For example, off-road motorcycles or track racing motorcycles may reduce the number of teeth on the driving sprocket or increase the number of teeth on the driven sprocket in order to improve acceleration performance; And some speed seeking car enthusiasts will replace the active sprocket of the motorcycle with a slightly larger number of teeth, or replace the driven sprocket with a slightly smaller number of teeth. However, when modifying, it is necessary to comprehensively consider factors such as engine performance, overall vehicle balance, and safety

Click to view the motorcycle model parameter table：

		Chain type	number of teeth
1	Alpha	420	36
2	Alpha	420	39
3	Alpha	420	41
4	Alpha	420	43
5	Alpha	420	46
6	pit bike	420	36
7	pit bike	420	39
8	pit bike	420	41
9	pit bike	420	43
10	pit bike	420	46
11	pit bike	428	36
12	pit bike	428	39
13	pit bike	428	41
14	pit bike	428	43
15	pit bike	428	46
16	CG/CB	520	36
17	CG/CB	520	39
18	CG/CB	520	41
19	CG/CB	520	43
20	CG/CB	520	46
21	CG/CB	520	49
22	CG/CB	525	39
23	CG/CB	525	41
24	CG/CB	525	43
25	CG/CB	530	39
26	CG/CB	530	41
27	CG/CB	530	43
28	dirt bike	520	36
29	dirt bike	520	39
30	dirt bike	520	41
31	dirt bike	520	43
32	dirt bike	520	46
33	dirt bike	520	49
34	dirt bike	525	41
35	dirt bike	530	41
36	139fmb	420	13
37	139fmb	420	14
38	139fmb	420	15
39	139fmb	420	16
40	139fmb	420	17
41	139fmb	428	13
42	139fmb	428	14
43	139fmb	428	15
44	139fmb	428	16
45	139fmb	428	17
46	CG/CB	428	13
47	CG/CB	428	14
48	CG/CB	428	15
49	CG/CB	428	16
50	CG/CB	428	17
51	CG/CB	428	18
52	CG/CB	428	19
53	CG/CB	520	12
54	CG/CB	520	13
55	CG/CB	520	14
56	CG/CB	520	15
57	CG/CB	520	16
58	CG/CB	520	17
59	CG/CB	520	18
60	CG/CB	520	19
61	CG/CB	520	13
62	CG/CB	525	14
63	CG/CB	525	16
64	CG/CB	525	18
65	CG/CB	530	13
66	CG/CB	530	14
67	CG/CB	530	16
68	CG/CB	530	18